Napkin Rings

 

These simple DIY wood burned napkin rings make a great addition to your boho or farmhouse style table setting. You can customize them as you wish with different colors and designs. Make a set and give them away as a hostess gift.

Directions

  1. Use a large cookie sheet as your work surface. Before you begin, fill your ST2200 with Bernzomatic Butane. To do this, insert the butane tip into the hole at the bottom of the torch and press down. You will hear the torch fill with butane. This should take about 8-10 seconds.
    Filling torch
  2. Place a bead onto the middle of the metal skewer. The skewer is used to protect your fingers and keep them away from the torch flame.
    Using skewer
  3. Ignite the torch and turn it on continuous mode. Burn the bead by moving the flame around the bead and using the skewer to turn the bead as you move the flame in an even motion.

Burned beadsCompleted napkin holders

What You'll Need


ST2200T

Detail Torch

ST2200T
Product Info

BF56

5.6 oz. Butane Cylinder

BF56
Product Info

Materials

  • 20mm Wood Beads
  • 8mm Wood Beads
  • Jute or Twine
  • Scissors
  • Cookie Sheet
  • Metal BBQ Skewer
Close