Fast Strong Glue Up

 

Video Credit: Bernzomatic Torchbearer David Waelder

Fast strong glue can be used on many projects and creates a strong bond. This project can be done by most people with a Bernzomatic torch and just a few essential, inexpensive materials.

Steps

  1. Apply wood glue to one of the edges of wood.
  2. Ignite the TS8000, and carefully heat the stick of hot glue.
  3. Once the glue has been heated, apply the hot glue stick to the same edge of wood that has wood glue.
  4. Combine the pieces of wood together, be sure to make a strong bond between them.
  5. Once the pieces have been glued together, take sandpaper and sand the edges of the wood to get a smooth finish.  

Tips

  • Read our General Safety Precautions before starting your project.
  • Read the instructions that come with your torch before beginning your project.
  • The torch flame should be blue for optimal temperature.
  • Always remove torch from fuel cylinder and store fuel in an upright position after completing your project.

What You'll Need


TS8000
TS8000

Max Heat Torch for Faster Work Times

Learn More

MG9
MG9

14.1 oz. MAP-Pro™ Hand Torch Cylinder

Learn More

TOOLS

  • TS8000 -Max Heat Torch for Faster Work Times
  • 14.1oz Map-Pro Hand torch cylinder
  • Keep a fire extinguisher or water source nearby in case of an emergency

MATERIALS

  • Wood
  • Hot glue
  • Wood Glue
  • Sandpaper
  • Safety glasses
  • Work gloves
Community Projects

#findyourfire

Share Your Project

No, Thanks Close